Видео

Saw you at flite fest, and the mustache was awesome. I wanna get into bigger quads. I have the beta fpv Cetus pro, which is just the mini whoop, but I want to fly outdoors more. I also don’t want to break the bank. What are your suggestions, or a video I can watch?

Thank you for this awesome video. Super helpful 👌 👍

@4:18, that happened to me on Saturday afternoon; chasing the "chosen" plane, I got brutally smacked by another chaser and my Ugly Wonder went down hard!

Hi Adam, this was one of the only Flite Fests I had to miss in the last 5 years, but I was there as long as I could be this weekend (6/22-23, 2024). Thanks for posting!

I'm the guy in the thumbnail for this vid. I know because I was the only guy in 2023 using an FM radio. And I have that shirt.

Does it fit in carry top shelf on planes ??

I want to get that bag so badly. The only bag I have is a 40L one from temu =(

Quiet fpv drone

how can i increase the volume of the timer?

awesome thanks, i will be setting that up on my tx

I have ffollowing problems 1. Transmitter doent show output mode 2, i accidentally soldered i bus input to sbus pad in FC will it ruin my fc 3. Channel mappin in Beta flight isnt working Please help me out

The "low" one on the left in the thumbnail is as high as i can get mine 😂

Hello this receiver suport F4 v3S flyit controller board ?

Killer video man, Adam thanks alot for clarifying those concepts.

ASMR 😀

I'm looking over at my Phantom 4 now...

How many grams is the servo ?

I just ordered the flysky i6x transmitter off of Ali Express. For $26.00

hay bro , please buy silent board for ur printer 😂😂which one is it? I have ender 3 pro and 1 week ago I replaced to silent mb and my ears stopped bleeding 😂😂

nope, i tried everything with Fs-i6 and a fs-x6b receiver with INAV (f405 wing miny - speedybee).... any advise?

when i uploaded the file and started printing, it was off centered?? i don’t know how to fix it. i have a bambu lab a1 mini and when i try to move the project it just says “off centered.” the project stays in the center for the file, but it’s off centered on the printer.

Nice axii, can you also share what's the brand of the printed facial foam from your Dji goggles?

Shout out to Flight Fest

How do u have the goggle angle view..wjat do I need to get 4 my quad to look like this..please tell

U need to put a cape on it😂👌🤟🤟🤘🤙👍👍.love ur vids..

Hey, how did you get rssi working on fly sky in this video?

If you fly 3D, you can still use the app, but do not use it to spin motors in ANY way, it doesnt understand and will full throttle your motors until the app is disconnnected, and not just closed, the full BT connection or usb

Adam - my name is Richard Litt. My previous rc experience is 30-size fuel rc Helicopter - I flew many years - my flying background was mostly level, no 3D. I sold my helicopter to get into 5" 4s lipo battery drone. I am using Liftoff simulator to learn how to fly my drone. I plan on flying LOS (similiar to my RC Helicopter flying) so i modified my drone (Nazgul5v2) and removed the antenna and replaced it with a 50ohm load. The lessons on-line are very helpful (RCwithAdam). I appreciate the Rate descriptions. I have some comments regarding beginner pilot drone control: 1. I started to fly in Acro mode 2. At the end of Lesson 2 you commented on being in Acro mode require corrections - i detected right or left drift as soon as i gave throttle. I have to correct this drift. 3. Most of Lesson 2 is in Level mode which does not require to correct drift corrections. 4. What is your opinion on staying in Level mode or Horizon Mode until i can switch to Acro Mode? I do not know how long that will take. I will not give in - fun hobby - I am a retired Aerospace Electronics engineer so i can deal with learing how to fly a drone. I can be reached at richardlitt6@gmail.com. Thanks

Merci pour ta vidéo Ça m’a aidé

I went on the auto desk website and it doesn’t have fusion 360 a it haves is fusion

This. Is. AWESOME!

That's the Reptile Cloud 149 cinewhoop frame. One of the few frames Catalyst Machineworks sold that wasn't their design. It's the smoothest flying quad I have. Like butter floating on the wind. Check your PID tune....

Thanks mon!

I just got my Bambu Labs P1S today. This video was very helpful!

TO RCADAM: PLEASE READ !!! hey I've been looking for a video on RUclips where someone upgrades the mini 2 se and others upgrades the mini 2 se motors with 2212 920kv brushless motors or just your regularly sold diy fpv drone motors please do a video where you take a dji drone leave everything the way it is except replace the motors I wanna know if it will work ok cause I want to do it to mine ! K thank you hope you see this !

Really nice

Bro create more cracy videos love from India

is this for resin or fdm

Thank you for this. The UK site sucks and its way more difficult to find this download. EDIT: My OS no longer supports the latest version of Fusion and there's no way to upgrade the OS without buying a newer computer. I don't have the money for that.

Thankyou, this helped me a lot

This seems like a pretty cool filament. A shame it's essentially unavailable currently.

How do you move the whole plane? I noticed u can add health to the parts and I want to make the whole aircraft invincible (still explodes on impact) but the thing is it’s all downloaded aircraft’s so I don’t want to piece by piece increase the health

Hey this was really useful as im building the Chimera7 V2 and it came supplied with the longer cable, was unsure how 'tight' the fitting of the cam wire to the unit was, i see you also were not too convinced of the connection but indeed the little cover presses it down nicely. Thanks again!

I feel like this is more stable against turbulences then a commercial airplane. Would like to see tests somehow.. but dont even know how you would test for that.

3 orders and you could buy a printer for the same price

like how the Transmitter has Labels but i cant find a transmitter with easy/quick labels within my budget

this is crazy looks like a game!

3:36 race stance take off - sweet. 5:33 what a perfect leaning pole ✌🏻

Is it safe to spray silicone on outside of electrical connector and on wire insulation? For automotive applications.

This maybe off topic or not I’m not sure. So I’m using this remote and a 10ch receiver. Now what I’m trying to do is use a hoverboard to turn into a lawnmower. I saw a video how connect and add the firmware. The firmware is for AUX I have it connected to ch1/ppm. On the right stick. (Left and right ) It makes the wheels go forward and backwards I can see the wheels spinning. But I don’t see the wheels moving left or right. I try moving all the stick every direction. I’m starting to think I need to do something in the settings so the right stick goes up or down to move left or right or the left stick does that either way I’m lost and not sure what to do